Inno Roof Bike Racks Review - 2016 Chrysler Town and Country- Video

Today on our 2016 Chrysler Town & Country, we're going to do a test fit of the Inno Fork Lock III Bike Carrier. Part number is INA391. We have a bike on our carrier and we have our carrier hooked to our vehicle. I'm just going to show you a few features. This is a fork-mounted bike rack as you can see, skewers and gauge, and when you come right to the back we have our wheel centered in the wheel cradle here. We're going to have a strap just pretty much holding it down and protecting our spokes, so we're going to go ahead and remove that. I'll get up here and disengage our skewer here, lift our cover up, hold onto our bike, disengage the skewer and we can loosen it over here. more

Watch Video

1/14/2016 8:47:29 AM

Inno Roof Bike Racks Review - 2016 Chrysler Town and Country ina392- Video

Today on our 2016 Chrysler Town & Country we're doing a test fit of the Inno multi-fork lock roof bike carrier, part number INA392. We have a bike on our carrier and we have our carrier hooked to our vehicle. I'd like to show you a few features. The first feature I'm showing you, this is a fork mounted bike rack as you see, fork bike carrier. Back here we have our wheels sitting in our wheel cradle with a strap pretty much hold it down and protecting our spokes. We're going to remove that. Then we're going to come up front so we can disengage our skewer. more

Watch Video

1/14/2016 8:47:18 AM

Kuat TRIO Roof Bike Racks Review - 2016 Chrysler Town and Country- Video

Today, on our 2016 Crystler Town and Country, we're doing a test pit of the Koowatt 00:00:05 Trio Roof Bike Rack, part number TR02. Now we have a bike on a rack, and we have our rack on our vehicle. I just want to show you a few features. Now, this is a four bike 00:00:17 carrier, as you can see. The skewer is engaged, and if we come to the back, we just have our tires sitting on our wheel cradle here, with a nice little strap on it, which is protecting our . just holding it down. I'm just going to remove that. We're going to come up front, here. To disengage this, pull out, and we need to loosen and tighten over here. more

Watch Video

1/14/2016 8:44:13 AM

Rhino Rack MountainTrail Roof Bike Racks Review - 2016 Chrysler Town and Country- Video

Today on our 2016 Chrysler Town and Country we're doing a test fit of the Rhino Rack mountain trail roof bike carrier. Part number RBC035. I have a bike on our carrier and we have our carrier hooked to our vehicle. Let me show you a few features. The first feature I would like to show you, this is a fork mounted bike rack. We have our skewer engaged. more

Watch Video

1/14/2016 8:42:37 AM

RockyMounts Roof Bike Racks Review - 2016 Chrysler Town and Country- Video

Today on our 2016 Chrysler Town and Country we're doing a test fit of the Rocky Mount Brass Knuckle Roof Mounted Bike Rack, part number R-K-Y-1-2-0-2. We have a bike on our rack and we have our rack hooked to our vehicle. I'd like to show you a few features. The first feature set is brass knuckles, so I wanted to show you that first. Here we go . We're going to show you how to engage and disengage that. We're going to come back to the back to work. more

Watch Video

1/14/2016 8:41:21 AM

Thule Roof Bike Racks Review - 2016 Chrysler Town and Country- Video

Today on our 2016 Chrysler Town & Country we're doing a test fit of the Thule ThruRide roof bike carrier, part number TH535. We have a bike on our carrier and we have a carrier hooked to our vehicle. I would like to just show you a few features. The first feature I am going to show you, this is a fork mounted bike rack, we have a skewer engaged. We're going to move toward the back here and we have our wheel cradle, we have our wheel set in there with a nice little bushing on our strap so it's going to protect our spokes and the tire itself. We're going to remove this here, pull it out of the way, open up the door here so I can take off our bike. I'll come up here and show you how we take off our skewer, disengage it here by pulling it out. more

Watch Video

1/14/2016 8:32:07 AM

RockyMounts Roof Bike Racks Review - 2015 Chrysler Town and Country- Video

Today on our 2015 Chrysler Town & Country, we will be test fitting the RockyMounts BrassKnuckles roof-mounted bike rack. That's part number RKY1202. Our Town & Country here today already has it's factory rails installed so we can begin by setting our bike rack on our rails. We want to make sure that our straps are undone. That way they can go underneath the rails here. What we're going to do once we have it seated in the spot that we want it, we're going to put our straps into place. more

Watch Video

2/6/2015 10:31:51 AM

Yakima FrontLoader Roof Bike Racks Review - 2015 Chrysler Town and Country- Video

Today on our 2015 Chrysler Town & Country we will be test fitting the Yakima FrontLoader roof-mounted bike rack. That's part number Y02103. Our Town & Country already has its factory rails installed as you can see there, so we can go ahead and begin by setting our bike rack on top of our rails. Once we get it up here we're going to want this to sit and grab our rail like that, so we'll make sure that's open. We'll guide it over our rail and set it down. We'll make sure it's straightened up and then we'll come up here to our tightening knob up front here and we'll go ahead and tighten that down. more

Watch Video

1/28/2015 6:38:14 PM

Yakima ForkLift Roof Bike Racks Review - 2015 Chrysler Town and Country- Video

Today on our 2015 Chrysler Town & Country, we will be test-fitting the Yakima Forklift Roof-Mounted Bike Rack. That's part number Y02098. Our Town & Country here today already has its factory rails installed as you can see. We can go ahead and begin by setting our bike rack on top of our rails. Now I'm going to go ahead and remove our bottom cap here. That way we can get it underneath our rails. I'm going to turn our little T sideways to unlock it and bring it out. more

Watch Video

1/28/2015 6:36:29 PM

Kuat TRIO Roof Bike Racks Review - 2015 Chrysler Town and Country- Video

Today on our 2015 Chrysler Town & Country we will be test fitting the Kuat Trio roof-mounted bike rack. That's part number TR02. Our Town & Country here today already has its factory rails installed as you can see, so we can go ahead and begin by setting our bike rack on top. What we'll want to do is we'll want to make sure that this square piece underneath our bike rack is sitting evenly with our bars like this as you can see. We'll keep that straightened up with our vehicle. Then we'll take our clamp. more

Watch Video

1/28/2015 6:33:32 PM

Thule Sprint Roof Bike Racks Review - 2015 Chrysler Town and Country- Video

Today on our 2015 Chrysler Town & Country, we will be test fitting the Thule Sprint roof mounted bike rack. That's part number TH528. Our Town & Country here today already has its factory rails installed as you can see there. We can go ahead and begin by setting our bike rack on top. We'll make sure that our strap is undone so we can go underneath. I'll go ahead and hop up there. more

Watch Video

1/28/2015 6:28:49 PM

Swagman Upright Roof Bike Racks Review - 2015 Chrysler Town and Country- Video

Today on our 2015 Chrysler Town & Country we will be test fitting the Swagman Upright roof-mounted bike rack. That's part number S64720. Our Town & Country here today already has its factory rails installed as you can see here, so we can go ahead and set our bike rack on top. Now we'll want to set our big plate here evenly over our bars like that. Then we'll take two of our clamps and we'll run those up through our holes here as you can see. We'll go ahead and do that. more

Watch Video

1/28/2015 6:21:32 PM

Swagman Fork Down Roof Bike Racks Review - 2015 Chrysler Town and Country- Video

Today on our 2015 Chrysler Town & Country we will be test fitting the Swagman Fork Down roof-mounted bike rack. That's part number S64710. On our Town & Country here today we've already got our factory rails installed, as you can see that, so we can go ahead and begin by setting our bike rack on top. Then we'll hope up there. Now we'll want to position our plate right here evenly on our load bars. We'll make sure it's lined up with our vehicle and then we'll take our clamps, and then we'll run them up through underneath like this. more

Watch Video

1/28/2015 6:18:19 PM

Rhino Rack MountainTrail Roof Bike Racks Review - 2015 Chrysler Town and Country- Video

Today on our 2015 Chrysler Town & Country, we will test fitting Rhino Rack Mountain Trail roof mounted bike rack. That's part number RBC035. Our Town & Country here today already has its factory rails installed. We can go ahead and begin by setting our bike rack on top. We'll want to make sure that our straps go underneath our rail. Just like that, then we can hop up there and make sure it's straightened up and in line with our vehicle as best as we can. more

Watch Video

1/28/2015 6:13:35 PM

RockyMounts TieRod Roof Bike Rack Review - 2014 Chrysler Town and Country- Video

Today on our 2014 Chrysler Town and Country, we'll be test fitting the Rockymounts Tierod roof mounted bike rack, part number RKY1014. With the factory roof rack system on our vehicle, we'll begin our test fit by placing our tierod directly on to our crossbars. Here at the front, we'll bring the rubber coated straps around our front bar and then remove the black plastic cover. We'll fit the straps into the head of the carrier and then use an Allen key to tighten down the Allen bolt which will tighten our straps around our front bar. With that tight we can go ahead and reinstall our black plastic cover. Here at the rear we'll loosen up the Allen bolts so we can bring our rear clamps around our rear bar. more

Watch Video

10/28/2013 12:39:35 PM

RockyMounts TieRod Stretch Roof Bike Rack Review - 2014 Chrysler Town and Country- Video

Today on our 2014 Chrysler Town and Country, we'll be test fitting the Rockymounts Tierod Stretch roof mounted bike rack, part number RKY1011. With the factory roof rack system on our vehicle, we'll begin by placing the Tierod Stretch directly onto our load bars. Here at the front, we'll bring our rubbed coated straps around our front load bar and then remove our black plastic cover. We'll fit the straps into the head of the carrier and use an allen key to tighten down our allen bolt, which will tighten our straps around our front bar. With those tight, we can go ahead and replace our black plastic cover. Here at the rear, we'll loosen up one the the allen bolts so that we can bring our clamp around our rear bar. We'll fit the bolt back through the clamp and tighten both bolts using an allen key. With the front and rear secure, we can go ahead and undo the rear wheel strap and make sure our skewer at the front is loose. We'll grab our bike and place it onto our bike rack. more

Watch Video

10/28/2013 12:39:35 PM

Swagman Fork Down Roof Bike Rack Review - 2014 Chrysler Town and Country- Video

Today on our 2014 Chrysler Town and Country we'll be test fitting the Swagman Fork Down roof-mounted bike rack, part number S64710. With the factory roof rack system on our vehicle, we'll begin our test fit by placing our bike rack directly onto our crossbars. Here at the front we'll bring our U-bolts around the underside of our front crossbar, feeding them up through our front platform. We'll secure it by tightening down 2 wing nuts for the U-bolt. Once we have that tight, we can repeat this process for the other side of the front platform. Here at the rear we'll drop our U-bolt through the top of the bike rack, making sure that the bolts go around the rear crossbar. more

Watch Video

10/28/2013 12:39:35 PM

Yakima FrontLoader Roof Bike Rack Review - 2014 Chrysler Town and Country- Video

Today, on our 2014 Chrysler Town and Country, we'll be test fitting the Yakima FrontLoader Wheel-Mounted Bike Rack, part number Y02103. With the factory roof rack system on our vehicle, well begin our test fit by placing the frontloader directly on to our crossbars. Here at the front, we can use the T handle to secure the front part of our bike rack. We move to the rear and drop the T bolt through their appropriate slot. Then, we can use the T handle on top to secure the end or rear bar. Well go ahead and undo the wheel strap at the rear and open up our wheel mount at the front. Well grab our bike and place it under our bike rack, securing it first with the wheel mount. more

Watch Video

10/4/2013 2:03:18 PM

Yakima ForkLift Roof Mounted Bike Rack Review - 2014 Chrysler Town and Country- Video

Today, on our 2014 Chrysler Town and Country, we'll be test fitting the Yakima ForkLift roof-mounted bike rack, part number Y02098. With the factory roof-rack system on our vehicle, we'll begin our test fit by placing the ForkLift directly onto our crossbars. Here at the front platform, we'll need to go ahead and remove our skewer. Then we can bring our bracket around our front bar and drop our T bolt through the appropriate slot. We'll tighten it down by tightening the T handle on top. We'll place the slotted bracket around our T handle, and then we can reinstall our skewer. Here at the rear, we can bring our clamp around our rear bar, drop the T bolt through the slot, and tighten it with the T handle on top. more

Watch Video

10/4/2013 2:01:33 PM

Swagman Upright Roof Mounted Bike Rack Review - 2014 Chrysler Town and Country- Video

Today, on our 2014 Chrysler Town and Country, we'll be test-fitting the Swagman Upright Roof Mounted Bike Rack, part number S64720. We'll begin our test-fit by placing our bike rack directly onto our cross bars. Here at the front platform, we'll bring our U-bolt around the underside of our front cross bar, fitting it back up through the front platform. We'll secure it by tightening down two wing nuts on our U-bolts. We'll repeat this process for the other side of the front platform. Here at the rear, we'll drop our U-bolt through the top of the bike rack, making sure it goes around our rear bar. more

Watch Video

10/4/2013 1:16:53 PM

SportRack Frame Mount Roof Mounted Bike Rack Review - 2014 Chrysler Town and Country- Video

Today on our 2014 Chrysler Town & Country well be test fitting the Sport Rack roof mounted frame mount bike rack part #: SR4611. With the factory roof rack system on our vehicle well begin our test fit by placing our bike rack directly onto our crossbars. Here at the front well take our U-bolts bringing them around the underside of our front crossbar and feed them up through our front platform. Then well secure them by tightening the wing nuts on top. With both U-bolts installed and all four wing nuts secured well move to the rear. Well place the bracket on top of our rear crossbar, sitting them between our crossbar and our bike rack. more

Watch Video

10/4/2013 1:14:11 PM

Yakima ForkLift Roof Mounted Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country, we'll be test fitting the Yakama forklift, roof mounted bike rack, part number Y02098. With the factory roof rack system on our vehicle, we'll begin our test fit by placing the forklift directly onto our crossbars. Here at the front, we'll bring the front clamp around our front bar, drop the T bolt through the appropriate slot, and tighten it down. We'll then need to remove our skewer, place the T slot around our T bolt, and then reinstall our skewer. We'll go ahead and leave it loose, that ways it's set for when we're ready to load our bike. Here at the rear, we'll bring our rear clamp around our rear bar, drop the T bolt through the appropriate slot, and tighten it down to secure it. With the front and rear of our bike rack secured, we'll go ahead and make sure that our rear wheel strap is undone. more

Watch Video

9/11/2013 2:02:17 PM

SportRack Roof Mounted Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town & Country we'll be test fitting the SportRack Roof Mounted Bike Rack, part number SR4622. With the factory roof rack system on our vehicle we'll begin by placing our SportRack directly onto our cross bars. Here at the front we'll bring our U-bolts around the underside of our front cross bar, feed it back up through our front platform, and secure it with the wing nuts. We'll do this for both sides of our front platform. Here at the rear we'll take our U-bolt, drop it through the top of our bike rack making sure it goes around our rear cross bar. Then we'll need to take our plastic clamp, fit it through our bolts, and make sure that it sits on top of our rear cross bar. With the bolts hanging down we'll take our metal clamp, fit the bolts through, and secure it with the wing nuts. more

Watch Video

9/11/2013 1:44:42 PM

RockyMounts TieRod Stretch Roof Bike Rack Review - 2013 Chrysler Town and Country- Video

Today, on our 2013 Chrysler Town and Country, we'll be test fitting the Rockymounts TieRod Stretch Roof Mounted Bike Rack. Part number RKY1011. With a factory roof rack system on our vehicle, we'll begin by placing our stretch directly onto our crossbars. Here at the front, we'll bring the rubber coated straps around our front bar and then we can remove the black plastic cover. We'll fit the straps into the head of the carrier, and the use an Allen key to tighten the Allen bolt, which will secure our straps around our front bar; once we have those tight we can replace the black plastic cover. We'll go ahead and check the skewer to make sure it's loose for when we're ready to load our bike. We'll loosen up the Allen bolts on our rear clamp and bring it around our rear bar. We'll feed back through the Allen bolt and tighten in place with the Allen key until it's secured around our rear bar. more

Watch Video

9/11/2013 1:40:18 PM

Swagman Upright Roof Mounted Bike Rack Review - 2013 Chrysler Town and Country- Video

Speaker: Today on our 2013 Chrysler Town and Country we'll be test fitting the Swagman Rooftop Bike Carrier part number S64720. We'll begin our test fit by placing the Swagman bike rack directly onto our crossbars. Here at the front platform we'll take a u-bolt, bring it around the front crossbar, fit it up through the holes in the platform and secure it with the wing nuts. We'll do this for both sides of the front platform. At the rear we'll drop our u-bolt through the top of our bike rack making sure that the bolts go around our rear crossbar. We'll then take our black metal clamp, fit the bolt through the holes and secure it around our bar with the wing nuts. Once we have the front and rear tight we can go ahead and undo both wheel straps and use the hand knob on the jaws to loosen it up. We'll grab our bike and place it onto our bike rack. more

Watch Video

9/11/2013 8:48:12 AM

Yakima ForkLift Roof Mounted Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country, well be test fitting the Yakima Forklift Roof Mounted Bike Rack, part number Y02098. Well begin our test fit by placing the bike rack on to the vehicles crossbar. Well loosen up the black wing nut and bring the front bracket on the underside of the front crossbar. Well insert the silver T-bolt into the slot and tighten down the black wing nut. Well then slide up the black plastic cover in between the black wing nut. Well then reinsert our securer that making sure that it is loose, so our force can slide on to it. more

Watch Video

8/27/2013 1:04:21 PM

Yakima FrontLoader Roof Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country, we'll be test fitting the Yakima FrontLoader roof-mounted bike rack, part number Y02103. We'll begin our test fit by placing the bike rack onto the vehicle's crossbars. We'll then loosen up the large black T handle at the front to position the front bracket around the front bar. With that done, we'll move to the rear and adjust the rear bracket around the underside of the rear bar, insert the silver T bolt, and tighten down the black wing nut. We'll then move back up to the front to tighten down the black T handle to secure the carrier to the vehicle. We're now ready to load up our bike. more

Watch Video

8/26/2013 12:14:53 PM

Swagman Fork Down Roof Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country we'll be test fitting the Swagman Fork Down Roof Mounted Bike Carrier, part number s64710. To begin our test fit we'll place our bike rack directly onto our factory crossbars. Here at the front platform we'll bring our U-bolt around the underside of our crossbar feeding it up through the front platform and tightening it in place with the wing nuts. We'll do this for both sides of the front platform. Here at the rear we'll take our U-bolt and drop it through the top our bike rack making sure that each end goes around our crossbars. Then we can place on our black bracket feed it through our U-bolt and tightening it place with the two wing nuts. more

Watch Video

8/26/2013 11:53:04 AM

RockyMounts TieRod Stretch Roof Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country we'll be test fitting the RockyMounts TieRod Stretch Roof Mounted Bike Carrier, part number rky1011. We'll begin our test fit by placing our bike rack directly onto our factory crossbars. Here at the front we'll go ahead and remove the black plastic cover and bring the straps around the underside of our crossbar fitting them back into the head of our bike rack. Then we can use an Allen key to tighten the Allen bolt which will tighten our straps around our front crossbar. Once we have those tight we can replace our black plastic cover and make sure our skewer is loose. Here at the rear we'll bring our rear bracket around our rear crossbar, make sure the bolts go through our bracket and tighten with an Allen key. more

Watch Video

8/26/2013 11:51:29 AM

RockyMounts TieRod Roof Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country we'll be test fitting the RockyMounts TieRod Roof Mounted Bike Carrier, part number rky1014. To begin our test fit we'll place our bike rack directly onto our factory crossbars. Here at the front we'll bring the rubber-coated straps around our front crossbar, remove our black plastic cover and then we can fit our straps back into the head of the carrier. We'll use an Allen key to tighten the Allen bolt which will tighten our straps around our front bar. Once we have those tight we can replace our black plastic cover and make sure our skewer is loose. Here at the rear we'll bring our rear bracket around our rear crossbar, drop the bolts through the holes and tighten them in place with an Allen key. more

Watch Video

8/26/2013 11:51:02 AM

  1